Search
USD
All Categories
    Menu Close

    Sabre - H Class Premium Percolating Fire Hose

    FIRE HOSE FOR EXTREME FIRES - H Class premium percolating fire hose. Specifically designed for forestry & bush fire fighting applications.

     
    Inside Diameter Range
    :
    1" (25 mm) - 2.5" (65 mm)
     
    Weight per Meter
    :
    0.16 - 0.48 kg
     
    Working Pressure Range
    :
    315 psi (21 Bar)
     
     
    Australian Made
    *

    Sabre - H Class FIRE HOSE FOR EXTREME FIRES

    Sabre™ is a percolating hose which allows water to seep through the textile reinforcement. By mechanically pin pricking the hose over its length, a thin water layer forms over the hose offering extra protection against burning coals.

    Sabre™ is a Class H fire hose with a high working pressure of 2100 kPa. This woven fire hose is made from filament polyester with a synthetic polymer lining. It has Australian Standard AS 2792 approval, including a low percolation rate. If required, the hose can be made with a higher percolation rate.

    LP - Low Percolation (Standard)
    MP - Medium Percolation
    HP - High Percolation

    Sabre™ is fully synthetic, making the fabric imperishable to moisture, unlike the original canvas percolating fire hose. It does not require drying after use, although drying does prevent surface mould stains

    Please note that this product does NOT include the hose fittings.

    SABRE Features:

    • Percolating fire hose
    • No drying after hose
    • High working pressure 2100 kPa
    • Easy to handle
    • Australian made
    • Australian Standard AS2792-1992
    • One year guarantee

    Primary uses:

    • Percolating fire hose
    • Forestry fire fighting
    • Bush fire fighting

     

    Technical Specifications
    Class Inside diameter
    mm
    Inside diameter
    inches
    Working Pressure
    Bar
    Burst Pressure
    Bar
    Weight per Metre(kg) Coil Diameter
    H 25 1” 21 52.5 0.16 0.36 m / 30 m
    H 38 1½” 21 52.5 0.23 0.40 m / 30 m
    H 51 2” 21 52.5 0.28 0.42 m / 30 m
    H 64 2½” 21 52.5 0.35 0.48 m / 30 m
    H 65 2½” 21 52.5 0.35 0.48 m / 30 m
    0.0 0
    Write your own review Close
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    *
    *
    *
    *

    Irrigation Unit Conversions

    Convert a given value and unit to different unit type. Conversions are available for flow rate, area, distance, time, volume, pressure, power, precipitation, salinity, and speed.

    Click here to see unit descriptions.


     to 
    Area:
     to 
    Distance:
     to 
    Time:
     to 
    Volume:
     to 
    Pressure:
     to 
    Power:
     to 
    Precipitation (Water Application) Rate:
     to 
    Salinity:
     to 
    Speed:
     to 

    Reference: Washington State University